
Notice whether water is missing, building up or draining away when it should remain in the tub. Each situation relates to a different part of the water system.
From the water supply to the outlet
Water enters through one or more inlets, passes through the valves and reaches the wash circuit. The controls use the water-level information available in the appliance. Draining may rely on a pump or gravity: don’t look for a pump without first confirming that one is fitted.
- If it won’t fill or takes too long to fill, start with the water supply, taps and external hoses. With two inlets, a fault affecting only hot or cold water means you need to check each water path.
- If the water level rises uncontrollably, safely stop the water from entering. Water appearing while the appliance is switched off means you need to distinguish between incoming water and backflow.
- If it fills and drains at the same time, check the drain installation and whether the pump is actually running.
- If water remains at the end of the cycle, distinguish between programmed water retention and incomplete draining. If the pump keeps running while the tub appears empty, don’t repeat cycles to silence it.
Retained water and water that reappears
A tub that hasn’t emptied presents a different issue from one that emptied and then received backflow afterwards. Note the time between events and whether another appliance connected to the same drain was used. Colour or smell can provide context, but neither identifies the source on its own.
If you need to retrieve the washing, use only the emergency drain specified for the model. Opening a plug while there’s water in the tub can release a flow that’s difficult to contain.
Frequently Asked Questions
Do all washing machines have a drain pump?
No. Some appliances, particularly certain semi-automatic models, drain by gravity through a valve. The height and layout of the outlet must suit that system.
Why might the spin cycle fail when water remains?
The controls may prevent a fast spin while they detect a water level that isn’t suitable for spinning. So if you can see water building up, it’s best to sort out the drainage first.
Does a drum with no visible water mean the machine isn’t filling?
No. Water may remain below the visible part of the drum, and the amount varies depending on the programme and load. Whether you can see water doesn’t replace a diagnosis of the filling issue.
Don’t add water manually to an automatic washing machine to make up for a level that seems low; first check how much water that model is designed to use.




