The washing machine isn't dispensing detergent or fabric softener from the drawer

Product left in the drawer may be due to how it was loaded, residue or insufficient water flow. A small amount of water remaining does not, by itself, mean the dispenser is faulty.

Identify what is left and when it should have been used

Check that you selected the right compartment and whether the programme uses that product. Pre-wash detergent and fabric softener are not dispensed at the same time. Also check the insert for liquid or powder and how the siphon is fitted, as described in the manual.

Do not fill past the maximum mark. Check whether the product is too thick, has gelled or has been stored outside the conditions on its label. Do not dilute it as a matter of course: follow the product and appliance instructions.

Distinguish between dirt and a lack of water

The drawer and its siphon should be cleaned by removing only the parts that are designed to come out. Samsung links dispensing to the inserts, maximum fill level, correct fitting and cleaning in its dispenser troubleshooting guide; the mechanisms for removing parts are not universal.

If it also fills with too little water, check the water supply. If water leaks out, use the drawer overflow troubleshooting guide. If a clean compartment still does not receive the expected flow of water, the dispenser, hoses and valve may need to be inspected.

Automatic dosing reservoirs work differently. If the fault affects this function, continue with auto-dosing not dispensing.

Check the compartment after the cycle phase that should empty it; checking beforehand can make it look as though product is being retained when it was not due to be dispensed yet.

View all articles in Problems with filling, water levels and drainage