The washing machine fills and drains at the same time

If water drains away while the washing machine is trying to fill, check how the model drains and how the hose is installed. Siphoning can occur without the pump driving the water.

Is the water draining by itself, or is the pump running?

Note whether you can hear the pump running and whether the control panel displays a warning. The sound helps describe what happened, but by itself it does not confirm which component is operating. If you can identify continuous pumping, follow the diagnosis for a pump that won't stop.

On a gravity-drain machine, check that the drain selector has not been left open. Its installation is different from that of an automatic machine designed to lift water using a pump.

Check the drain outlet against the manual

The height of the drain outlet, how far the hose is inserted, and air entering the connections where required can affect unintended draining. Whirlpool documents this issue in its explanation of siphoning during filling; its recommendations apply to the appliances described, not to all washing machines.

Do not seal a connection that needs to admit air with tape, or improvise a raised hose position. Check the installation against the guide to drain height, securing the hose and siphoning and the model documentation.

If the installation is correct and the controls continue alternating between filling and draining, the water-level system and any activated safety feature should be checked. Do not keep repeating the fill cycle indefinitely.

Distinguish this from water flowing back in after the cycle has finished: when filling and draining happen at the same time, the diagnostic process is different.

View all articles in Problems with filling, water levels and drainage