
To interpret a noise, consider its type alongside the cycle stage and the movement you observe. A banging noise, a roar and a hum each call for different checks.
Which sound is most prominent
| Sound or movement | Relevant guide |
|---|---|
| Banging and movement as the machine speeds up | Excessive vibration and rocking |
| A continuous roar that gets louder as the speed increases | Loud noise during the spin cycle |
| Scraping or rattling linked to each rotation | Metallic rubbing and objects |
| A hum with no water intake, movement or draining | An operation that does not take place |
A noise can travel through the casing and seem to come from somewhere else. You cannot identify a part just because the sound seems to come from near it.
Before suspecting an internal fault
With the machine stopped, check for visible objects in the clothes, contact with furniture and external hoses hitting the casing. If it started after installation, note that; if it gradually got worse, describe how it changed.
Do not push an object out of sight. Retrieving an item from between the drum and tub depends on authorised access and may require a technician.
When to stop
Violent banging, movement, continuous rubbing against the seal, an odour or smoke are reasons to stop using the machine. Do not hold the washing machine while it is spinning or remove panels to listen close to the motor.
Frequently Asked Questions
Does a new sound always mean a part needs replacing?
No. It may come from a buckle, contact with furniture or a normal operation that you had not noticed before. How persistent it is and any associated signs will determine whether it needs checking.
How can I record a noise so it is useful for diagnosis?
Record it from outside without moving the machine or removing panels, and note when it occurs. Do not run another test if there is already banging, heavy rubbing or any sign of an electrical problem.
Why does the noise change depending on the cycle stage?
Water intake, pumping and washing movements use different systems. The speed also increases during the spin cycle, so the noise level may change.
A recording made from a safe position can help; include the programme, cycle stage and load so the sound has context.




