Water appearing while the washing machine is switched off may be coming through the water supply or flowing back through the drain. Restarting the machine won’t stop either of these physical causes.
Connect when the water appears with the water supply and drain
Turn off the washing machine’s taps if you can do so safely, and prevent more water from accumulating. Note whether the problem appeared after using a sink, dishwasher or another appliance connected to the same drain. That timing points towards water flowing back from the drain.
A slow water entry while the water supply is on may indicate a valve that isn’t sealing properly. If the water stops reappearing when you turn off the supply, this observation can help with diagnosis, but it doesn’t mean you should dismantle the valve or replace an inspection of the plumbing.
Don’t rely on appearance alone
Clear water doesn’t necessarily mean it’s fresh water: water flowing back from the drain may be diluted. Cloudy water doesn’t always identify the pipe either, as residue in the drum can dirty incoming water. The timing, recurrence and connection with each water supply are more useful clues.
If a mechanical fault is suspected, the solenoid valve needs to be diagnosed. Disconnecting the power prevents the machine from being activated, but it won’t stop a valve that is mechanically allowing water through.
If there’s water near power points, don’t approach them to unplug the machine. Isolate the power from a dry location and get help if you can’t control the water flow.
Keep the water supply turned off until you find the cause; leaving the machine switched off doesn’t guarantee it will stay empty.
View all articles in Problems with filling, water levels and drainage
