To drain a faulty washing machine, first isolate the power, turn off the water supply and let the contents cool. Then use only the drainage method that the manual allows users to carry out.
Prepare the area before opening anything
- Stop the cycle. Disconnect the power from a dry, accessible location; if there is water near any connections, do not try to reach them.
- Turn off the water supply and wait until the water can be drained without risk of scalding. Do not check the temperature by opening the door or filter.
- Check the manual for the emergency drain and prepare shallow containers, towels and space to empty them. The amount of water retained may exceed the capacity of one container.
- If there is an auxiliary hose, direct its outlet into the container and control the flow using the designated closure, following the manual. If the procedure uses the filter, loosen it only as instructed, gradually, and without removing it all at once.
- Put plugs and closures back in place before using the machine again.
Whirlpool distinguishes between models with a drain hose and accessible filters in its guidance on draining retained water. This access is not available on all machines.
When not to continue
If you cannot find an authorised method, the cap is stuck, the water cannot be contained, or you would need to remove panels, seek assistance. A gravity-drained semi-automatic machine requires its own specific procedure; lowering any hose is not a universal solution.
Draining the machine does not fix the cause of the drainage problem. To retrieve the clothes, then check the door opening requirements without forcing the lock.
Keep the machine isolated until you identify the fault; removing the water does not confirm that it is safe to use again.
View all articles in Problems with filling, water levels and drainage
