The drain pump runs continuously

A pump that runs continuously when the drum appears to be empty may be responding to a safety feature or inconsistent water-level information. It does not automatically mean the pump or control board is faulty.

Brief draining versus continuous operation

Some programmes drain water at the beginning or end. Check whether this behaviour is expected. The problem is different when pumping continues for a long time, keeps restarting and prevents any operation, especially if accompanied by a warning.

An empty-looking drum does not prove there is no water elsewhere in the machine. The system may detect residual water, an incorrect water level or a leak in a lower area.

What to check before stopping use

  • The exact message and when the pumping starts.
  • Any visible water on the floor or recent signs of dampness.
  • Whether the issue started after the appliance was moved, a filter was cleaned or an overflow occurred.
  • Whether the programme takes in water or immediately starts draining again.

If water appears outside the appliance, follow the leak location steps and isolate the power supply from a dry location. Do not tilt the washing machine to drain a tray or tamper with the float to clear the alarm: the safety feature does not fix the cause.

What the inspection needs to distinguish

Depending on the design, the water-level sensor, the anti-flood system, the drain circuit or the pump control may need to be checked. The fact that the pump motor keeps running does not prove that water is flowing correctly.

Do not keep the appliance running to see how long it takes to stop if a persistent behaviour unrelated to the programme has already been identified.

View all articles in Problems with filling, water levels and drainage