
Maintaining a washing machine means removing residue from accessible parts and following the routine for your model. Odours, mineral deposits and accidental contamination call for different approaches.
Choose a path based on what you need to address
If you want to start a full check, first identify whether the machine is front-loading, top-loading, a twin tub or a washer-dryer. The cleaning guide by washing machine type helps you avoid looking for filters your machine doesn’t have or running an automatic cycle on a semi-automatic machine.
When the dirt is localised, use the guide to the parts that need cleaning. It helps distinguish a detergent dispenser from an inlet or drain filter and sets out which parts the owner can attend to. The drum-cleaning cycle complements these tasks; its name alone doesn’t tell you which product it can take.
Not all deposits are treated the same way
| Situation | First step |
|---|---|
| Odour coming from inside | Work out when it appears and which area it is strongest in before choosing a cleaning method. |
| Film, dried soap or greasy residue | Identify the affected surfaces and a compatible cleaner. |
| Possible mineral scale | Check the water and distinguish limescale from detergent. |
| Material accidentally introduced | Identify it and decide whether it can be handled or use should be stopped. |
The washing machine odour guide distinguishes dampness and residue from drain odours or signs of burning. For mineral deposits, see limescale and water quality; for an incident after a load, see accidental or heavy soiling.
Maintenance you can keep up
Preventive maintenance combines care between washes, regular tasks and checks for wear. Note the product and programme used, what you found and whether it comes back. This information is more useful than switching between products without knowing what has changed.
Cleaning removes dirt; descaling targets mineral deposits; disinfection requires a method with a verified purpose and conditions. Choose products based on their purpose and compatibility, and don’t mix them. If there is a leak, drainage failure, smoke or electrical damage, go to troubleshooting before starting a clean.
Frequently Asked Questions
Does a normal wash clean the inside of the washing machine?
The water from a load may carry away some residue, but it doesn’t guarantee that the dispenser, folds or filters are clean. The machine has its own maintenance tasks.
Does a self-cleaning function eliminate all manual maintenance?
No. Check which surfaces the function cleans. Parts with visible residue and checks specified in the manual still need attention.
Does cleaning the drum replace cleaning the filter?
No. An empty cycle is not the same as removing objects or lint from an accessible filter. These are different tasks and should be carried out according to the machine’s design.
Can I follow the same routine for a front-loader and a twin tub?
You can apply the same principles of checking and drying, but not the entire procedure. A front-loader has a door seal and a different system from a twin tub’s separate tubs.
Your model’s manual sets out what you can access and how to treat it. Use that as a basis to choose a specific task and check the result before doing more.




