If the washing machine drains and then takes in water again, investigate where the water is backing up from. If it happens when a sink or another appliance is used, the shared drain is a likely cause.
Check when the water returns
Note whether the water returns immediately after pumping, while another drain is in use, or after several hours without activity. Also check whether the household drain gurgles, overflows or drains slowly. Don’t run more water just to trigger another overflow.
If it isn’t linked to other drains and the water level rises slowly, consider water entering while switched off. The dirty appearance may come from residue already inside, so it isn’t conclusive evidence.
Check the visible connection, not the plumbing blindly
Check that the hose is secured and inserted as specified in the model’s instructions. A poorly connected outlet and a blocked household drain need different fixes. The installation must address the shared drain and its venting in accordance with applicable local requirements.
Don’t add a universal non-return valve to hide the symptom: it may not be compatible with the flow rate, and it won’t clear a blockage in the building’s plumbing. Don’t seal connections that need an air gap, either.
If water drains away while it is filling, this is a case of simultaneous filling and draining. Keeping the two events separate helps avoid applying a siphoning fix to a later backflow problem.
Don’t use the washing machine until the backflow is under control. If it depends on shared plumbing, arrange for a plumber to inspect it as well as the appliance, where appropriate.
View all articles in Problems with filling, water levels and drainage
