The drain pump runs continuously

A pump that runs continuously while the tub appears empty may be responding to a safety feature or inconsistent level information. This does not automatically mean that the pump or control board is faulty.

Brief draining versus continuous operation

Some programmes drain water at the start or end. Check whether this behaviour is expected. The situation is different if the pumping continues, keeps repeating and prevents any operation, especially if an alert is displayed.

An empty-looking drum does not prove that there is no water elsewhere. The system may detect residual water, an incorrect water level or a leak in a lower area.

What to check before stopping use

  • The exact message and when the pumping starts.
  • Any visible water on the floor or recent signs of dampness.
  • Whether the issue started after moving the appliance, cleaning a filter or an overflow.
  • Whether the programme starts taking in water or immediately starts draining again.

If water appears outside the appliance, follow the leak detection guide and isolate the power supply from a dry location. Do not tilt the washing machine to empty a tray or tamper with the float to clear the alarm: the safety feature does not fix the underlying cause.

What the inspection should check

Depending on the design, the level sensor, the leak protection system, the drain circuit or the pump control may need to be checked. The fact that the pump motor keeps running does not prove that water is flowing correctly.

Do not keep the appliance running to check how long it takes to stop if persistent operation unrelated to the programme has already been identified.

View all articles in Problems with filling, water level and drainage