If the washing machine drains and then water flows back in, investigate the return path. If this happens when a sink or another appliance is being used, it points to a shared drain.
Check when it returns
Note whether the water returns immediately after pumping, while another drain is in use, or after several hours of inactivity. Also check whether the household drain gurgles, overflows or drains slowly. Do not run more water to provoke another overflow.
If it is not linked to other drains and the water level rises slowly, consider water entering while switched off. The dirty appearance may come from residue already inside, so it is not conclusive evidence.
Check the visible connection, not the plumbing blindly
Check the hose positioning and insertion against the model’s instructions. A poorly connected outlet and a blocked household pipe need different fixes. The installation should address sharing the drain and its venting in accordance with applicable local requirements.
Do not add a universal non-return valve to hide the symptom: it may not be compatible with the flow rate and will not clear a blockage in the building’s plumbing. Also, do not seal connections that require air to enter.
If water is lost while it is entering, the issue is filling and draining at the same time. Keeping the two episodes separate helps avoid applying a siphoning fix to a later backflow.
Do not use the washing machine until the backflow is under control. If it depends on the shared pipe, arrange for the plumbing to be checked as well as the appliance, where appropriate.
View all articles in Problems with filling, water level and drainage
