The drain pump runs continuously

A pump that runs continuously while the drum appears empty may be responding to a safety feature or inconsistent level information. It does not automatically mean that the pump or control board is faulty.

Brief draining versus continuous operation

Some programmes drain water at the start or end. Check whether this behaviour is expected. It becomes a problem when pumping continues for a long time, keeps repeating and prevents any operation, especially if accompanied by a warning.

An empty-looking drum does not prove that there is no water elsewhere. The system may detect residual water, an incorrect level or a leak in a lower area.

What to observe before stopping use

  • The exact message and when the pumping starts.
  • Any visible water on the floor or recent signs of damp.
  • Whether the incident began after moving the appliance, cleaning a filter or an overflow.
  • Whether the programme allows water in or immediately starts draining again.

If water appears outside the appliance, follow the leak detection guidance and isolate the power supply from a dry location. Do not tilt the washing machine to empty a tray or tamper with the float to clear the alarm: the safety feature does not fix the cause.

What the inspection needs to distinguish

Depending on the design, the level sensor, the anti-leak system, the drain circuit or the pump control will need to be checked. The fact that the pump motor keeps running does not prove that water is circulating correctly.

Do not keep the appliance running to check how long it takes to stop if persistent behaviour unrelated to the programme has already been identified.

View all articles in Filling, water-level and drainage problems