The washing machine is not dispensing detergent or fabric softener from the drawer

Product left in the drawer may be related to how it is placed, residue, or insufficient water flow. A small amount of water remaining does not, by itself, indicate a faulty dispenser.

Identify what is left and when it should have been used

Check that you selected the correct compartment and that the programme uses that product. Prewash detergent and fabric softener are not dispensed at the same time. Also check the liquid or powder insert and the siphon assembly as described in the manual.

Do not exceed the fill mark. Check whether the product is too thick, has gelled, or has been stored outside the conditions specified on its label. Do not dilute it out of habit: follow the instructions for the product and the appliance.

Distinguish between dirt and insufficient water flow

The drawer and its siphon should be cleaned using only the permitted disassembly method. Samsung links dispensing to the inserts, maximum level, positioning and cleaning in its dispenser troubleshooting guide; the removal mechanisms are not universal.

If little water is entering as well, check the water supply. If water is leaking out, use the drawer overflow troubleshooting guide. If a clean compartment still does not receive the expected water flow, the dispenser, hoses and valve may need to be inspected.

Automatic dosing reservoirs work differently. If the fault affects this function, continue with automatic dosing not dispensing.

Check the compartment after the phase that should empty it; checking earlier may make it seem as though product is being retained when it was not yet due to be dispensed.

View all articles in Problems with filling, water level and drainage