Leak-protection systems: safety hose, valve and sensor tray

A leak-protection system safeguards specific points along the water supply route. To understand its coverage, identify where it detects a problem, where it shuts off the water, and which parts are upstream or downstream of the shut-off point.

Protections with different coverage

  • Shut-off by flow rate or volume: it activates when the condition set for that device is met; not every slow leak meets that condition.
  • Double-walled hose: it uses an outer casing and its own detection or containment mechanism; by definition, it does not protect every connection in the building.
  • Safety solenoid valve: it can shut off an inlet point when instructed by the control system.
  • Tray with detector: it detects water that reaches the designated base and activates the programmed response.

A brand name may refer to several components. Check the model diagram rather than assuming that any product with that name covers the entire home.

What remains outside each shut-off point

A leak upstream of a valve will not stop just because a downstream point is shut off. A sensor at the base may not detect water that spills outside the route to that base either. This is why an accessible tap and compatible hoses and fittings are needed.

The trays and external detectors add site-specific safeguards, each with its own limitations. They do not replace appliance compatibility or repair existing leaks.

If the protection is activated

Keep the message and stop using the appliance as instructed. Do not tilt the machine to hide water in the tray or bypass sensors. A drain that runs continuously may be part of a protection system, and the cause needs to be understood.

Check which point the system detects and which one it shuts off; these two details define the actual protection it provides.

View all articles in Washing technologies: motors, sensors and automation