To drain a faulty washing machine, first isolate the power supply, turn off the water supply and let the contents cool. Then use only the drainage method that the user manual permits.
Prepare access before opening it
- Stop the programme. Disconnect the machine from a dry, accessible location; if there is water near the connections, do not try to reach them.
- Turn off the water supply and wait until the water can be drained without risk of scalding. Do not check the temperature by opening the door or filter.
- Find the emergency drain in the manual and prepare shallow containers, towels and space to empty them. The amount of water retained may exceed the capacity of one container.
- If there is an auxiliary hose, direct its outlet into the container and control the flow using the intended closure, following the manual. If the procedure uses the filter, loosen it only as instructed, gradually and without removing it all at once.
- Put plugs and closures back in place before using the machine again.
Whirlpool distinguishes between models with a drain hose and accessible filters in its guidance on draining retained water. This access is not available on all machines.
When not to continue
If you cannot find an authorised method, the plug is stuck, the outlet cannot be contained, or you would have to remove panels, seek assistance. A gravity-fed semi-automatic washing machine requires its specific procedure; lowering any hose is not a universal solution.
Draining the water does not fix the reason the machine is not draining. To retrieve the clothes, next check the door-opening conditions without forcing the door.
Keep the machine isolated until you identify the fault; removing the water does not confirm that it is safe to use again.
View all articles in Problems with filling, water level and drainage
