The drain pump runs continuously

A pump that runs continuously when the tub appears empty may be responding to a safety feature or inconsistent water-level information. This does not automatically mean the pump or control board is faulty.

Brief draining versus continuous operation

Some cycles drain water at the start or end. Check whether this behaviour is expected. The situation is different when pumping continues, repeats and prevents any operation, especially when accompanied by a warning.

An empty visible drum does not prove there is no water elsewhere. The system may detect residual water, an incorrect water level or a leak in a lower area.

What to check before stopping use

  • The exact message and when the pumping starts.
  • Visible water on the floor or recent signs of moisture.
  • Whether the issue began after moving the appliance, cleaning a filter or an overflow.
  • Whether the cycle takes in water or immediately starts draining again.

If water appears outside the appliance, follow the leak troubleshooting steps and disconnect the power from a dry location. Do not tilt the washing machine to empty a tray or adjust the float to clear the alarm: the safety feature does not fix the cause.

What the inspection should distinguish

Depending on the design, the water-level sensor, the anti-leak system, the drain circuit or the pump control will need to be checked. The fact that the pump motor keeps running does not prove that water is flowing properly.

Do not keep the appliance running to see how long it takes to stop if you have already identified persistent operation unrelated to the cycle.

View all articles in Problems with filling, water level and draining