Water leaks in the washing machine: find the source

Water leaks in the washing machine: find the source

To locate a leak, note where the water first appears and which stage it occurs during. The final puddle may be far from the source because water can travel along the casing or floor.

Stop the leak before looking for its source

Stop using the machine and turn off the water supply when you can do so safely. If water reaches electrical connections, do not touch plugs or the casing to check; isolate the power from a dry, safe place. Do not run the washing machine with the door open to observe the inside.

The first point where water appears guides the inspection

An external water inlet connection can leak even when the machine is idle if it remains under pressure. A household drain that overflows during pumping calls for a plumbing fix, even if the puddle is around the washing machine.

Details worth noting

Note the programme, load, and whether you had just cleaned a filter, repositioned the detergent drawer or moved the appliance. These changes can help you decide what to check first. Do not use glue or sealant on a connection if you have not identified its sealing mechanism.

Frequently Asked Questions

Does the location of the puddle always identify the leaking part?

No. Water can run down the front or travel along a hose before dripping. The first place that gets wet provides more information than the centre of the puddle.

Can a leak occur only with certain programmes?

Yes. The water level, dispensing stages, movement and draining operations vary. This link can help locate the leak without confirming a specific part.

Is it safe to keep using the washing machine if the leak is small?

Do not assume it is safe just because the leak is small. Water can reach electrical connections or the leak can worsen. Stop using the machine until you identify and fix the source.

A follow-up test is only appropriate once the cause has been fixed and all connections and safety guards have been restored.