Cleaning and maintenance of washing machines

Cleaning and maintenance of washing machines

Maintaining a washing machine involves removing residue from accessible parts and following the routine for its model. Odours, mineral deposits and accidental contamination call for different approaches.

Choose a route based on what you need to resolve

If you want to start a complete inspection, first identify whether the machine is front-loading, top-loading, a twin-tub model or a washer-dryer. Cleaning by washing machine type helps you avoid looking for filters your machine does not have or running an automatic cycle on a semi-automatic model.

When the dirt is localised, use the map of components to clean. It helps you distinguish a detergent dispenser from an inlet or drain filter, and identify which parts the owner can attend to. The drum-cleaning cycle complements these tasks; its name alone does not tell you which product it can be used with.

Not all deposits are treated the same way

SituationInitial decision
Odour coming from insideFind out when it appears and which area it is concentrated in before choosing a cleaning method.
Film, dried soap or greasy residueIdentify the affected surfaces and a compatible cleaner.
Possible mineral depositsCheck the water and distinguish limescale from detergent.
Material accidentally introducedIdentify it and decide whether it can be handled or whether use should be stopped.

The washing machine odour guide distinguishes dampness and residue from drain odours or signs of burning. For mineral deposits, see limescale and water quality; for an incident after a load, see accidental or heavy soiling.

A maintenance routine you can repeat

Preventive maintenance combines care between washes, periodic tasks and checks for wear. Note the product and programme used, what you found and whether it returns. This information is more useful than switching between products without knowing what changed.

Cleaning removes dirt; descaling acts on mineral deposits; disinfection requires a method with a verified purpose and conditions. Choose products based on function and compatibility, and do not mix them. If there is a leak, drainage failure, smoke or electrical damage, go to troubleshooting before starting a cleaning task.

Frequently Asked Questions

Does a normal wash clean the inside of the washing machine?

Water from a wash may carry away some residue, but it does not guarantee that the dispenser drawer, folds or filters are clean. The machine has its own maintenance tasks.

Does a self-cleaning function eliminate all manual maintenance?

No. Check which surfaces the function cleans. Parts with visible residue and checks recommended in the manual still need attention.

Does cleaning the drum replace cleaning the filter?

No. An empty cycle is not the same as removing objects or lint from an accessible filter. These are different tasks and should be carried out according to the machine's design.

Can I follow the same routine for a front-loading washing machine and a twin-tub model?

You can follow the same principle of checking and drying, but not the entire procedure. A front-loading machine has a door seal and a different circuit from a twin-tub model.

Your model's manual defines what you can access and how to treat it. With that as your guide, you can choose a specific task and check the result before doing more.