If the spin cycle fails, first check that the programme allows it, that the drum drains and that the load can balance. Wet laundry does not prove that the motor is faulty.
Water retained or insufficient spin
If you see water collected in the drum, start by checking for a drainage problem. If the drum is empty, check that you haven’t selected spin cancellation or a programme that limits the speed to protect fabrics.
Whirlpool includes spin speed selection, the door lock, load and suds among the checks in its spin and drain guide. The appropriate speed also depends on the laundry care labels.
Check the load without repeatedly testing it
A single heavy item can make it difficult to distribute the load evenly. Once the programme has stopped and the door can be opened, follow the load distribution instructions in the manual. Don’t routinely add more items to the drum or repeat tests if the machine bangs, moves or scrapes.
Note whether it always fails, only with certain items or after being moved. Spinning with a smaller load may point to a balance or drive-capacity issue, but it does not confirm a fault with the suspension, belt or motor.
If it limits the speed again
Excessive vibration needs its own diagnosis. If there’s no clear external cause, a technician should check the drive and speed signal according to the appliance. Direct-drive motors do not necessarily use the same parts as a belt-driven system.
Don’t try to compensate for a fault by increasing the speed: use only settings suitable for the items and stop the test if mechanical symptoms recur.
