The permitted load depends on the programme and the items being washed, not just the advertised capacity in kilograms. The laundry must fit and move as described in the manual; being able to close the door does not prove that the load is suitable.
Dry weight and volume answer different questions
When capacity is stated in kilograms of dry laundry, compare it with that weight; do not interpret the figure as a limit for laundry that is already soaking wet. Then check the programme’s maximum load: wool, quick wash or drying programmes may allow less than the reference cycle.
A light, bulky item can take up all the available space before reaching the permitted weight. A compact, absorbent item can be difficult to distribute. For duvets and blankets, also check the requirements for the individual item.
Load according to the machine’s design
In a front-loader, put the laundry in without pressing it against the door. In a top-loader, follow the manufacturer’s instructions for distributing items around the agitator or over the impeller. Do not wrap a long item around a central component or press down to fit more in.
The rule about leaving a hand-sized gap does not apply to every cycle and design. Use the load guidance in the manual.
Small loads and imbalance
A single item can bunch together during spinning. Check whether the machine permits that load and what corrective action it recommends; do not add items as ballast. If you need to redistribute the load, wait until the machine has stopped and the door is unlocked.
Compressed laundry, uneven cleaning and tangling are reasons to review the load size, but do not by themselves confirm a fault. Persistent knocks and movement require investigation if the load already complies with the instructions.
Decide on the load before starting; redistributing it afterwards does not make an oversized or excluded item acceptable.
