A washing machine that bangs or moves needs its support and load checked, but it may also have an internal fault. If the banging is violent, stop the cycle without trying to hold the machine in place.
If it happens from installation
Check that the transit bolts have been removed as instructed. Check that the feet are supported and that the machine is level while switched off. A flexible floor, an unsupported foot or contact with a piece of furniture can affect stability.
Do not remove screws based on appearance: the documentation identifies which ones are for transit. Nor should you compensate for an unsuitable floor by placing soft materials underneath without checking that they are compatible.
If it only happens with certain loads
A bulky item can hold water and concentrate the weight. When it is safe to open the machine normally, check the amount and distribution of laundry. Follow the programme-specific limits, which may be lower than the rated capacity.
The control system may try to redistribute the load and cancel the acceleration. Repeating the spin cycle without changing an identified condition will not help and may make the banging worse.
When it happens with suitable loads
If the machine was properly supported and its behaviour has changed, note any bouncing, movement of the unit and noises. The suspension needs checking if it is not controlling the movement; drum play points to a different type of damage.
Reducing the spin speed or putting down a mat may change the vibration you feel, but it does not prove that mechanical damage has gone away.
Only resume the cycle once you have corrected an identified external cause and there is no remaining banging, scraping or unusual movement.
View all articles in Abnormal washing machine noises and vibrations
