Resistance when turning by hand does not mean the same thing in every design. With the washing machine unplugged, a new obstruction or pronounced rubbing means you should stop and check the design before applying force.
Do not confuse a blocked drum with a locked door
A door that will not open is an access problem; here, what matters is the drum’s mechanical movement once it is accessible in the normal way. Some brakes and transmissions prevent it from turning freely, especially in top-loading designs. Do not try to release them using the controls or by overriding a safety lock.
What to look for without forcing it
- Whether the resistance appeared suddenly or increased over time.
- Whether there is localised rubbing, an uneven gap or a visible part out of position.
- Whether an item from the load is missing or you heard a bang before the drum stopped.
- Whether the drum appears to have dropped in relation to the opening or is rubbing against the seal.
An object between the drum and the outer tub is one possibility; the support, deformation or bearings may also be involved. These observations can help guide an inspection, but they cannot, by themselves, identify every type of damage.
Do not insert rods through the perforations or turn the drum using levers. You could push the object against the heating element or damage surfaces that will later need to form a seal. Removing panels or opening the outer tub requires the appropriate procedure and expertise.
When a structural inspection is needed
If the drum is visibly off-centre or has significant play, the drum shaft and support should also be assessed. A repair in this area cannot be confirmed from a photograph or a single sound.
Do not use the machine if the blockage is not caused by a documented brake; do not run a spin cycle to see if it clears.
