The washing machine won’t spin or reach full speed

If the spin cycle fails, first check that the programme allows spinning, the drum can drain and the load can be balanced. Wet clothes do not prove that the motor has failed.

Water retained or insufficient spin-drying

If you see water collecting in the drum, start by checking for a drainage problem. If the drum is empty, check that you have not selected spin cancellation or a programme that limits the speed to protect the fabric.

Whirlpool lists speed selection, the door lock, the load and suds among the checks in its spin and drain guide. The right speed also depends on the care labels on your clothes.

Check the load without repeatedly trying to spin

A single heavy item can make it difficult to distribute the load evenly. Once the programme has stopped and it is safe to open the door, follow the manual’s instructions for distributing the load. Do not routinely add more clothes to the drum or repeat the test if the machine bangs, moves or scrapes.

Note whether the problem happens every time, only with certain items or after moving the machine. If it spins with a lighter load, that may point to a balance or drive-capacity issue, but it does not confirm a problem with the suspension, belt or motor.

If it keeps limiting the speed

Excessive vibration needs a separate diagnosis. If there is no obvious external cause, a technician should check the drive and the speed signal for that model. Direct-drive motors do not necessarily use the same parts as a belt-drive system.

Do not try to compensate for a fault by increasing the speed. Use only settings that are suitable for the clothes, and stop the test if mechanical symptoms return.

View all articles in Rotation, Agitation and Spin Failures