The washing machine won’t drain or leaves water in the drum

If water remains in the drum, first check that a hold-rinse option hasn’t been selected. If the drain cycle you requested doesn’t work, check the outlet route without opening a filter while it is under water pressure.

Check that water is being retained

Damp clothes and water left in the drum are not the same thing. If the drum has already emptied, continue with not spinning. If water remains, check the selected option and the drain instructions in the manual, provided there is no leak, unusual smell or sign of an electrical fault.

Check what you can access

  • Check whether the external section of the hose is crushed or kinked.
  • Check whether the household drain is overflowing or draining poorly. A blockage outside the machine can also prevent it from finishing the drain cycle.
  • Note whether the pump is silent, humming or seems to be running without moving water. No sound does not confirm that the water is flowing properly.
  • If the manual specifies an accessible filter, first prepare for safe draining and then clean it.

Access varies, and some models have no user-accessible filter, as explained in the Whirlpool guide to drainage problems. Don’t remove panels looking for a filter that the manual doesn’t mention.

If the outlet is clear and the problem persists

The pump, its internal pipes or the control signal need to be checked. The pump diagnosis distinguishes between a blockage, a mechanical fault and a power supply issue. If there is a lot of foam, also tell the engineer which detergent you used and how much.

Don’t open the door or filter cap suddenly to speed up draining; first get the retained water under control.

View all articles in Filling, water-level and drainage problems