The washing machine drum does not turn during the wash

A horizontal drum that has stopped during the wash may be waiting for a cycle condition or have a mechanical or drive problem. Check that it should be turning before looking for a part.

Check when it stopped moving

Note whether it filled, whether the door remains locked and whether the programme is still progressing. Soaking, heating or sensing may involve pauses. The duration alone is not enough to confirm a fault.

It is useful to distinguish whether it also fails to spin or whether only the slow movement is affected. A sound that seems to come from the motor does not prove that the drive is reaching the drum.

Mechanical resistance with the machine isolated

Only after disconnecting the machine, safely draining it and opening the door normally, inspect the accessible drum without tools. If the manual allows you to turn it by hand, do so gently, without trying to force it past a stop. Rubbing or significant resistance calls for a check for a blocked drum.

If it moves in an apparently normal way but the programme does not drive it, the controls, wiring, motor and transmission still need to be distinguished. On machines that have one, a broken or slipped belt interrupts this movement; direct-drive machines require other checks.

What you cannot deduce by elimination

Not all motors use brushes. Before blaming the fault on the carbon brushes or replacing a module, the drive diagnosis must confirm the type of motor and the signals it receives.

Stop checking if you notice rubbing, an odour or abnormal resistance; continuing the programme could worsen the damage caused by a mechanical blockage.

View all articles in Turning, agitation and spinning faults