Washing machine won’t spin or reach speed

If the spin cycle fails, first check that the programme allows spinning, the drum drains and the load can balance. Wet clothes don’t prove the motor is faulty.

Water left in the drum or insufficient spin

If you see water pooling, start by checking for a drainage problem. If the drum is empty, check that you haven’t selected spin cancellation or a programme that limits the speed to protect fabrics.

Whirlpool includes spin speed selection, the door lock, the load and suds among the checks in its spin and drain guide. The right speed also depends on the care labels on your clothes.

Check the load without trying to force it

A single heavy item can make it difficult to distribute the load evenly. Once the programme has stopped and the door can be opened, follow the load distribution instructions in the manual. Don’t routinely add more to the drum or repeat tests if the machine bangs, moves or scrapes.

Note whether it happens every time, only with certain items or after moving the machine. Spinning with a lighter load may point to a balance or drive-capacity issue, but it doesn’t confirm a problem with the suspension, belt or motor.

If it limits the speed again

Excessive vibration needs its own diagnosis. If there’s no clear external cause, a technician should check the drive and speed signal for your machine. Direct-drive motors don’t necessarily use the same parts as belt-driven systems.

Don’t try to compensate for a fault by increasing the speed: use only settings suitable for the garments, and stop testing if mechanical symptoms return.

View all articles in Rotation, agitation and spin faults