The washing machine is leaking water from the door

If water is leaking from the front door, first check the contact between the glass and the seal with the machine stopped. A trapped item of clothing or misalignment can cause the leak even if the whole seal is not faulty.

Visual inspection with the appliance isolated

Wait until the machine can be opened normally and safely, with no water likely to spill through the opening. Disconnect it before checking the accessible area. Check for clothing caught between the glass and the door seal, any residue, and cuts or deformations in the seal.

Cleaning the door seal is for removable residue. A tear or an area worn down by friction needs an assessment of whether the door seal needs replacing; glue will not reliably restore its function.

The door and drum matter too

If the door sags, the hinge has play or the latch does not line up, the inspection should include the handle, latch and hinge. Do not force the door shut or tighten screws indiscriminately to compensate for incorrect alignment.

If the leak occurs alongside rubbing or an uneven gap around the drum, investigate the internal clearance. Replacing the seal without correcting that contact may lead to the same damage happening again.

Before washing again

The cause must be identified and the seal restored. If you cannot tell whether it is surface residue or a damaged part, stop using the machine and arrange an inspection. Water running down the front can reach electrical components underneath.

Do not test the door by pressing against it during a wash; the latch should hold it in position by itself.

View all articles in Water leaks from the washing machine: find the source