If water or foam spills out of the drawer, stop the cycle and check the positioning, residue and product used. Water left inside after the wash is a different issue.
Check what is overflowing
Note whether it is mostly foam or water, and whether it happens at the start, during the prewash or when the fabric softener is dispensed. Check whether you have changed products, increased the dose or recently removed the drawer.
Excessive foaming can occur with an unsuitable dose, but that alone does not explain every leak. If water overflows without foam, the path connecting the dispenser to the tub is also worth checking.
Checks you can do
With the appliance disconnected from power, check that the drawer and its inserts are seated correctly. Follow the drawer and siphon cleaning instructions for your model; do not insert wires into internal outlets or dismantle the distributor from above.
If it began after installation, note any changes to the water supply or the appliance's position. Turning down the tap out of habit may hide the symptom without resolving a blockage or incorrect installation. Check the inlet requirements against the documentation.
If the overflow continues with the drawer fitted correctly
A technician should distinguish between a distribution fault or an inlet valve and a blocked or damaged hose. Do not replace the drawer based on its appearance without identifying the cause.
Do not leave the dispenser open during a test to watch the water flow; note when the overflow happens from the outside.
View all articles in Water leaks from the washing machine: find the source
