A handle that doesn’t engage the latch, a broken latch and a door that has dropped due to a hinge problem each require different repairs. First, safely retrieve any clothing that has become trapped.
Identify what movement has been lost
The handle may move without operating the latch; the latch may not engage with its strike; or a loose hinge may cause the whole door to shift. Observe what happens with the appliance stopped, without forcing the glass or handle.
If it won’t open, follow the safe laundry retrieval steps before dismantling anything. The electrical lock is assessed separately under the safety lock.
What the parts diagram should identify
Check whether the handle, pin, spring or hinge is supplied separately or as part of a door assembly. Don’t replace a spring with another that merely looks similar: its shape and position are part of the mechanism.
Preparation and installation
During authorised dismantling, the door must be securely supported so its weight doesn’t rest on the glass, seal or a single fixing. The power supply must remain isolated, and any retained water must be contained.
Installation must restore alignment, handle operation and latch retention without requiring manual pressure. Then check that the door closes and, where relevant, that there is no leak through the door.
Don’t glue a retaining part in place or lever against the glass. If the drum rubs against the seal, adjusting the hinge is no substitute for diagnosing that damage.
Before resuming the wash, the door must open and close using its intended mechanism, without needing to lift or hold it in place to engage.
View all articles in Washing machine component diagnosis and repair
