The washing machine is leaking from the door

If water is escaping through the front door, first check the contact between the glass and the gasket with the machine stopped. A trapped item of clothing or misalignment can cause a leak even when the entire gasket isn’t defective.

Visual inspection with the appliance disconnected

Wait until the machine can be opened normally and safely, with no water that could spill out of the opening. Disconnect it before checking the accessible area. Check for an item of clothing caught between the glass and the door boot, debris, or cuts or deformations in the gasket.

Cleaning the gasket is for removable debris. A tear or an area worn down by friction needs an assessment of whether the door boot needs to be replaced; gluing it does not reliably restore its function.

The door and drum matter too

If the door droops, the hinge has play, or the latch engages at an angle, the inspection should include the handle, latch and hinge. Don’t force the door closed or tighten screws indiscriminately to compensate for incorrect positioning.

If the leak appears alongside rubbing or uneven spacing around the drum, investigate the internal clearance. Replacing the gasket without correcting that contact may cause the damage to recur.

Before washing again

The cause must be identified and the seal restored. If you can’t tell the difference between surface debris and a damaged part, stop using the machine and arrange an inspection. Water running down the front can reach electrical components below.

Don’t test the door by pressing against it by hand during a wash; the door should stay in position on its own.

View all articles in Washing machine water leaks: find the source