If water is coming out through the front door, first check the contact between the glass and the seal with the machine stopped. A trapped garment or misalignment can cause the leak even if the entire seal is not defective.
Visual inspection with the appliance isolated
Wait until the door can be opened normally and safely, with no water likely to spill through the opening. Disconnect the appliance before checking the accessible area. Check whether a garment is trapped between the glass and the door seal, whether there is any debris, and whether the seal has cuts or deformations.
Cleaning the door seal is for removable debris. A tear or an area worn down by friction needs an assessment for door seal replacement; gluing it does not reliably restore its function.
The door and drum matter too
If the door sags, the hinge has play, or the latch does not engage straight, the inspection should include the handle, latch and hinge. Do not force the door shut or tighten screws indiscriminately to compensate for incorrect positioning.
If the leak appears alongside rubbing or an uneven gap around the drum, investigate the internal clearance. Replacing the seal without correcting that contact could lead to the same damage happening again.
Before washing again
The cause must be identified and the seal restored. If you cannot tell whether it is surface debris or a damaged part, stop using the appliance and arrange an inspection. Water running down the front can reach electrical components underneath.
Do not press your hand against the door during a wash as a test; the door should stay in position on its own.
View all articles in Water leaks in the washing machine: find the source
