How to assess and replace the door seal

The seal should be assessed for replacement if it has cuts, deformation or wear that affects the seal. A removable stain or dirt does not, by itself, mean the door boot is unserviceable.

Match the damage to the leak

Locate the point of leakage at the door and check whether it lines up with a cut, trapped clothing or rubbing. If the drum is off-centre or loose, that cause must be fixed to prevent damage to the new seal.

A mark that keeps appearing in the same spot may indicate mechanical contact. Don’t blame all wear on the cleaning product without checking the positioning and any objects involved.

How door boots differ

Drains, auxiliary openings, seating profiles and clamps vary by model. Use the parts diagram; a seal with a similar diameter may leave an opening in the wrong position.

What replacement involves

Preparation includes disconnecting the machine, shutting off the water supply, draining any water and documenting access. On some machines, the door boot can be released through the opening; others require the front panel to be removed. Don’t assume a video of another machine shows the correct access method.

Installation must follow the correct orientation and seating, and refit all retaining components without pinching or twisting the seal. Once the guards are back in place, check that the door closes, the drum turns without rubbing and the seal is watertight.

Adhesives are not a standard fix for a tear. If any edges catch clothing, the damage to the fabrics should also be investigated.

A new seal won’t compensate for a sagging door or a drum rubbing against it; the cause of the contact must be fixed.

View all articles in Washing machine component diagnosis and repair