The washing machine is leaking from the door

If water is coming out through the front door, first check the contact between the glass and the seal with the machine switched off. A trapped item of clothing or misalignment can cause the leak even if the whole seal is not faulty.

Visual inspection with the appliance isolated

Wait until the door can be opened normally and safely, with no water likely to spill through the opening. Unplug the appliance before checking the accessible area. Check for an item of clothing trapped between the glass and the door seal, any debris, and any cuts or deformation in the seal.

Cleaning the door seal is appropriate for removable debris. A tear or an area worn down by friction needs an assessment of whether the door seal needs replacing; gluing it does not reliably restore its function.

The door and drum matter too

If the door has dropped, the hinge is loose or the latch does not engage straight, the inspection should include the handle, latch and hinge. Do not force the door shut or tighten screws indiscriminately to compensate for incorrect positioning.

If the leak appears alongside rubbing or an uneven gap around the drum, investigate the internal clearance. Replacing the seal without correcting that contact may lead to the same damage happening again.

Before washing again

The cause must be identified and the seal restored. If you cannot tell whether the problem is superficial debris or a damaged part, stop using the appliance and arrange an inspection. Water running down the front may reach electrical components below.

Do not test the door by pressing your hand against it during a wash; the door should stay in position by itself.

View all articles in Water leaks from the washing machine: find the source