A visible leak underneath the washing machine does not directly identify the pump, drum or hose. First check whether the water is coming from the front, an external connection or a filter that was recently opened.
Relate the water to the operation
Stop the machine and turn off the water supply if it is actively leaking. Isolate the power from a dry location; do not kneel in the puddle or put your hand underneath a machine that is still connected to power.
| When it appeared | What to note |
|---|---|
| While filling | Whether the drawer, an inlet or the front gets wet first |
| While moving | Whether it coincides with the water level, load, suds or rubbing |
| While draining | Whether an external pipe overflows or water appears near the pump access |
| After cleaning the filter | How the cap was fitted and whether the drip starts around its edge |
What you can check from the outside
Without moving or tilting the machine, look for water marks running down from the door or drawer. If the source is the filter cap, follow the specific check for it after safely draining the machine.
When the source is not visible, hoses, the pump assembly and other seals should be inspected based on the leak path identified. A leak associated with the drum supports may require the bearings and seal to be assessed.
Dark liquid may be mixed with dirt from the floor or the machine. Its colour alone does not confirm a damaged gearbox.
Note when it happened and the first point where you noticed moisture; do not remove panels to reproduce a leak while the machine is connected to the water supply.
View all articles in Water leaks from the washing machine: find the source
