Product left in the drawer may be related to how it’s positioned, residue, or a lack of water flow. A small amount of water left behind does not, on its own, mean the dispenser is faulty.
Identify what’s left and when it should have been dispensed
Confirm which compartment you selected and whether the cycle uses that product. Prewash detergent and fabric softener aren’t dispensed at the same time. Also check the insert for liquid or powder and how the siphon is fitted, as described in the manual.
Don’t exceed the fill line. Check whether the product is too thick, has gelled, or has been stored outside the conditions on its label. Don’t dilute it out of habit: follow the product and appliance instructions.
Distinguish residue from a lack of water flow
The drawer and its siphon should be cleaned by taking them apart only as permitted. Samsung notes that dispensing can depend on the inserts, maximum fill level, positioning, and cleaning in its dispenser troubleshooting guide; removal mechanisms vary by model.
If little water is also entering the washer, check the water supply. If water leaks out, use the drawer overflow troubleshooting. If a clean compartment still isn’t receiving the expected flow of water, the distributor, water lines, and valve may need to be inspected.
Automatic-dosing reservoirs work differently. If the problem affects that function, continue to auto-dosing not dispensing.
Check the compartment after the phase that should empty it; checking beforehand may make it seem as though product is being left behind when it hasn’t yet been dispensed.
View all articles in Problems with filling, water level and draining
