Clean the detergent and fabric softener drawer and its housing

Clean the manual dispenser drawer, its approved inserts and the accessible housing. Removal varies by model: not all drawers come out completely, and not all parts are dishwasher-safe.

Identify the drawer and removable parts

Check the manual for the release catch and compartments. The fabric softener insert or siphon may have a specific position; note how it is fitted before removing it. If there are automatic dispensers connected to circuits, use their specific procedure.

Whirlpool warns in its cleaning guide that full removal and dishwasher compatibility vary between dispensers. Avoiding the temptation to pull harder when you meet resistance is part of the preparation.

Remove the inserts without deforming the plastic

  1. With the machine stopped and disconnected from the power supply for manual work, remove the drawer using its release mechanism.
  2. Remove only the inserts identified as removable. Do not disconnect pipes or connections behind the housing.
  3. Rinse the parts using the water and method permitted by the manual. If there is dried detergent or gelled fabric softener, soften and remove it gradually as instructed; use a soft brush if permitted.
  4. Clean the visible recess with a slightly damp cloth. Do not insert tools into water outlets or wet internal areas.
  5. Rinse, dry and refit the inserts in their original positions. Slide the drawer back in without forcing the runners.

Check the assembly and product flow

Check that the siphon is not raised, twisted or out of position. Do not change its position to try to empty a compartment. A small amount of water remaining afterwards may be due to the design; compare its behaviour with the manual.

If the problem continues with the parts clean and correctly fitted, distinguish between product left in the dispenser and water coming out of the drawer. Cleaning does not confirm a pressure or valve fault. For widespread dark film in the housing, see contamination in damp areas.

Keep the original inserts and do not swap parts between similar-looking compartments. Their fit affects dispensing and draining.

View all articles in Which washing machine components to clean and how to identify them