The washing machine is not taking detergent or fabric softener from the drawer

Product left in the drawer may be related to how it is positioned, residue or insufficient water flow. A small amount of water remaining does not, on its own, indicate a faulty dispenser.

Identify what is left and when it should have been used

Check that you selected the right compartment and that the programme uses that product. Prewash detergent and fabric softener are not dispensed at the same time. Also check the insert for liquid or powder and how the siphon is fitted, as described in the manual.

Do not exceed the fill line. Check whether the product is too thick, has gelled or has been stored outside the conditions stated on its label. Do not dilute it as a matter of course: follow the instructions for the product and the appliance.

Distinguish between dirt and lack of water

The drawer and its siphon should be cleaned using only the permitted removal method. Samsung links dispensing to the inserts, maximum fill level, positioning and cleaning in its dispenser troubleshooting guide; removal mechanisms are not universal.

If little water is entering as well, check the water supply. If water is leaking out, use the drawer overflow troubleshooting guide. If a clean compartment still does not receive the expected flow of water, the dispenser, pipes and valve may need to be inspected.

Automatic-dose reservoirs work differently. If the fault affects this function, continue with auto-dosing not dispensing.

Check the compartment after the phase that should empty it; checking beforehand may make it seem as though a product has been left behind when it was not yet due to be dispensed.

View all articles in Filling, water-level and drainage problems