Auto-dosing does not dispense or dispenses the wrong amount

Before assuming auto-dosing is faulty, check that it is enabled for the cycle, that the product is compatible and that the reservoir is seated correctly. The smell of the laundry does not indicate how much detergent has been dispensed.

Rule out settings and product supply

  1. Check the manual to confirm that the programme supports the function and that it is selected.
  2. Check the concentration and dose settings for the product being used.
  3. Check that the reservoir is filled, that it is the correct one and that it is seated properly, without exceeding the marked levels.
  4. Only carry out the auto-dosing cleaning authorised for that model.

A conventional detergent drawer that leaves product behind requires diagnosis of detergent dispensing and flushing; it does not mean that an automatic pump is fitted.

How to interpret the refill alert

A full reservoir with an alert does not confirm that a sensor is faulty. On the appliances described in this Samsung help guide, the alert may remain until the next dose is dispensed. Check what is expected for your model.

If the product is still not dispensed, or too much is dispensed, despite the correct settings, a technician should check the suction, air in the circuit, blockages, pump and level detection in accordance with the design.

When it needs repair

The repair may affect the lines, dosing assembly or electronic control. Diagnosis and spare part identification should specify which component is being supplied and how the dispensed amount is verified.

Do not use a universal priming procedure, insert tools into the ports or open sealed cartridges. If the manual allows an alternative manual dosing method, follow its instructions to avoid a double dose.

Record the product, selected concentration, cycle and exact message: this combination helps distinguish a pending alert from a persistent failure to dispense.

View all articles in Washing machine component diagnosis and repair