A leak protection system protects specific points along the water path. To understand its coverage, identify where it detects a problem, where it shuts off the water, and which parts are upstream or downstream of the shut-off point.
Protections with different coverage
- Shut-off by flow or volume: activates when the condition specified for that device is met; not every slow leak meets that condition.
- Double-walled hose: uses an outer casing and its own detection or containment mechanism; by definition, it does not protect every connection in the building.
- Safety solenoid valve: can shut off a water inlet when instructed by the control system.
- Tray with detector: detects water that reaches the designated base and activates the programmed response.
A product name may refer to several components. Check the model's diagram rather than assuming that every product with that name protects the whole home.
What lies beyond each shut-off point
A leak upstream of a valve will not stop just because a downstream point is shut off. A sensor at the base will not necessarily detect water that escapes outside the path to that base. This is why an accessible tap and compatible hoses and connections are needed.
Trays and external detectors add site-specific measures, each with its own limitations. They do not replace appliance compatibility or repair existing leaks.
If the protection activates
Keep the message and stop using the appliance as instructed. Do not tilt the machine to hide water in the tray or bypass sensors. A drain that runs continuously may be part of a protection system, and the cause needs to be identified.
Check which point the system detects and which one it shuts off; these two details define the actual protection.
View all articles in Washing technologies: motors, sensors and automation
