
The control panel status helps distinguish a programme pause from an interruption or loss of power. Note any messages and the cycle stage before cancelling or restarting.
Start with what the controls are doing
| Observed status | Go to |
|---|---|
| Powers on and lets you make a selection, but won’t start | Start conditions |
| Was washing, then stopped | Stopped part-way through the cycle |
| Keeps running or repeats without finishing | Repeated stages and time remaining |
| Ignores buttons or selector positions | Panel and controls |
| Lights go out and it returns to the beginning | Power-offs and restarts |
Statuses that may be expected
Delay start, soak, cooling, control lock and load balancing can affect how the appliance responds. A timer that does not count down for a while does not necessarily mean the timer is faulty.
The manual explains which indicators correspond to these statuses. If this behaviour is new, prevents a cycle from finishing, or coincides with retained water, noise or heating, note that context for diagnosis.
Before clearing the status
Photograph the exact message and note the water, load and cycle stage. Cancelling or restarting may restore a control status, but it won’t repair a leak or a damaged part. If there are signs of an electrical issue, don’t use restarting as a repeated test.
Frequently Asked Questions
Does a countdown that has stopped prove the washing machine is faulty?
No. The estimated time may stay the same while the appliance completes an operation or redistributes the load. Whether it happens repeatedly and whether the cycle finishes can help identify a problem.
Should I record the code before restarting?
Yes. Note the exact code and any light pattern, as well as the cycle stage. Restarting may erase information that explains why the controls stopped.
Are locked controls and a faulty panel the same thing?
No. An enabled control lock can normally disable certain commands. A faulty button, selector or interface should be investigated after checking whether that setting is on.
First, look for the condition the cycle cannot complete; the electronics may be responding to a problem with water, the door lock or movement.




