When the control panel is on but the machine won’t start, check the selected setting and the start conditions. This doesn’t prove that the control board is damaged.
Check the start command
- Make sure you selected a cycle and pressed Start as described in the manual. Some controls require you to hold the button or confirm a specific command.
- Check the delayed start or end time. The time shown may indicate a programmed delay.
- Check whether the child lock is on; don’t try button combinations from other brands.
- Check the door or lid lock indicator. A latched door doesn’t guarantee that the machine has detected it.
- Check whether it tries to drain or fill but can’t get any water before moving on.
If the button doesn’t register the command
Distinguish a confirmation sound or visible change from a complete lack of response. If a button doesn’t work or the selector points to a different setting, continue with controls that aren’t responding.
Don’t press the buttons repeatedly or hit the control panel. A delayed response can be mistaken for a lockout while the machine is still processing an expected state.
When the power state changes
If all the indicators go out, stop treating it as a start-up condition and check loss of power. If the machine stays on and displays a message, note the full text before cancelling.
Note what changes straight after you press Start: the door locking, a sound, the display and water entering the machine can help pinpoint where it stops.
View all articles in Washing machine won’t start, stops or won’t finish the cycle
