If the panel switches off and returns to the beginning during a wash, distinguish a loss of power from a control reset. A pause with the indicators still lit requires a different diagnosis.
Observations you can record
Note what it was doing when it switched off, whether any other lights in the home changed, and whether the display returns to the programme or to the initial selection screen. Also record any recent changes to connections or the appliance's location.
You don't need to repeat the episode with a larger load or a higher temperature to identify a pattern. If there is an odour or signs of heat damage, follow the guidance for burning or smoke.
External power supply and internal electronics
A poor connection, an interruption to the power supply, or a problem with the power supply unit or controls can produce similar symptoms. If a safety switch trips, use the electrical tripping troubleshooting guide and don't keep resetting it.
Electrolux refers power supply problems to an electrician and advises against using extension leads in its guidance on circuit loading and connections. The circuit's specific capacity depends on the local installation.
If the power supply is confirmed to be working
An inspection of the control board, power supply and connections should take into account external loads that may cause the fault. Don't install a generic voltage stabiliser to compensate for an unidentified fault.
How to resume a programme after a power cut varies by model. Follow the manual and check which operations were actually completed before treating the load as washed.
Record whether switching off clears the selection or resumes the cycle; this difference helps assess the power supply and controls.
View all articles in Washing machine won’t start, stops or won’t finish the cycle
