
The control panel status helps distinguish a programme pause from an interruption or loss of power. Note down any messages and the cycle phase before cancelling or restarting.
Start with what the controls are doing
| Observed status | Troubleshooting path |
|---|---|
| Powers on, lets you select a programme, but does not start | Start conditions |
| Was washing, then stopped | Stops midway through the cycle |
| Keeps running or repeats without finishing | Repeated phases and time remaining |
| Does not respond to buttons or selector positions | Panel and controls |
| Lights go out and it returns to the beginning | Power-offs and restarts |
Statuses that may be expected
Delay start, soak, cooling, control lock and load balancing can change how the machine responds. A timer that does not advance for a while does not necessarily mean the timer is faulty.
The manual explains which indicators correspond to these statuses. If this behaviour is new, prevents a programme from finishing, or occurs alongside retained water, noise or heating, note that context for diagnosis.
Before clearing the status
Photograph the exact message and note the water, load and cycle phase. Cancelling or restarting may restore the controls, but it will not fix a leak or a damaged part. If there are signs of an electrical problem, do not use restarting as a repeated test.
Frequently Asked Questions
Does a countdown that stops mean the washing machine is faulty?
No. The estimated time may stay the same while the machine completes an operation or redistributes the load. Repeated occurrences and the lack of a result can help identify a problem.
Should I note down the code before restarting?
Yes. Note down the code exactly as shown, any pattern of lights, and the cycle phase. Restarting may clear information that explains why the controls stopped.
Are locked controls and a faulty panel the same thing?
No. A control lock that has been enabled can normally disable certain commands. A faulty button, selector or interface should be investigated after checking this status.
First, look for the condition that the cycle cannot complete; the electronics may be responding to a problem with water, the door lock or movement.




