AEG washing machine error codes and warnings

AEG washing machine error codes and warnings

AEG warnings are grouped by water inlet, drainage, door lock, protection, heating and power supply. Find the PNC to apply the table to your platform.

Written code or sequence of flashes

In European AEG support families, E10/E11/C1 may be accompanied by one beep or flash; E20/E21/C2, by two; E40/E41, by four. Count complete sequences and pauses, and check that your manual documents this method. Do not interpret every flash as a code.

The situation changes the priority

EF0/EFO and EF3 require you to distinguish between foam, laundry distribution and a leak. If water is escaping, deal with the leak before attempting any reset. EH0/EHO relates to the power supply; E60 covers heating problems, but does not identify a specific part on its own.

E50, C9 and F9: seek assistance if they persist

The official AEG help for E50 groups these messages as a motor or motor control fault. It recommends a reset and contacting service if the warning returns. Do not continue using the appliance if the issue persists, and do not measure internal circuits to locate the fault.

The PNC and load type help you check the manual, filter access and controls. This information does not authorise applying the meaning of an AEG code to another brand in the same group, or carrying it over to every market.

Frequently Asked Questions

Where can I find the full model number of my AEG washing machine?

Look for the model and PNC on the rating plate, following the location given in the manual. Copy the complete reference and version, if shown; the product name does not identify every variant.

Does the same code mean the same thing on all AEG washing machines?

Do not assume that it does. The PNC distinguishes platforms and variants, and procedures for front-loading, top-loading and washer-dryer models may differ even within the same warning family.

How can I tell a normal notification from a fault?

Compare the sequence with the manual and the cycle behaviour. An active function or a wait period may be normal; a persistent supply, door lock or protection warning needs its own troubleshooting steps.

Does clearing the code confirm that the problem is fixed?

No. A reset may remove the display without fixing the cause. If there is a leak or a persistent electrical fault, stop using the appliance and seek assistance.

What information should I give the service technician?

Provide the model, PNC, complete code or flash sequence, and load type. Mention the cycle stage, any water left in the machine or visible leak, and any changes to the installation or detergent dosage.

Keep a record of the complete subcode; reducing all warnings to an electrical fault removes useful diagnostic information.