Error E40 or E41 in AEG washing machines: door or lid not closed

E40, E41 or four beeps or flashes on compatible AEG models indicates that the door or lid is not properly closed or is not recognised. Check the closure with the machine stopped.

Front door or top lid

The manufacturer’s documentation covers both designs. Check the PNC manual to identify which closure must be fully engaged; a top-loading model may have different components from a front-loading one.

If it opens normally, move aside any trapped clothing and reduce the load if it is preventing the door from closing. Inspect the latch and its fit without inserting any objects. Close it normally and use the start control on the panel. Do not slam the lid or keep the closure pressed during the wash.

Mechanical child lock, where fitted

Some models have a mechanical device that changes how the closure works. Check it only if the manual identifies it and explains its position; do not confuse this feature with the electronic button lock.

If the appliance still does not recognise a clear and properly closed door, note whether the warning appears before water is taken in and request assistance. If the problem is that it will no longer open, see door and safety lock before trying to remove the clothing.

A door that is physically closed may still not be recognised; the code alone does not identify the faulty component.

View all articles in AEG washing machine error codes and warnings