Error EF0, EFO or EF3 in AEG washing machines: foam, leak and protection

EF0/EFO on AEG machines may be related to foam, a leak or an imbalance. In the documentation consulted, EF3 indicates leak detection: first check whether water is escaping.

Water visible: stop the test

The manufacturer's documentation distinguishes several conditions within this error family. If there is a leak, turn off the tap and stop using the machine. Disconnect it only if you can do so safely with dry hands and from a dry area; do not touch plugs surrounded by water.

Check whether the leak is coming from the detergent drawer, seal, filter or hose. From the outside, check for clothes caught in the seal and for connections that were recently handled. Do not tilt the appliance to remove water from its base.

If there is no leak, check for foam and load distribution

If there is a lot of foam in the drum, check the dose, concentration and additives. Let it subside as described in the manual, without using home remedies. The detergent drawer may need cleaning, which can be done by the user.

If the main issue is an imbalance, wait for the door to unlock normally and redistribute the load within the programme's capacity. Do not automatically treat EF0 as excess detergent if there is another observable issue.

If the warning appears again, note the PNC and the conditions. The AEG warning index distinguishes the related error families; a persistent leak or one that cannot be accessed requires service.

The message disappearing does not mean you can continue if water is still escaping.

View all articles in AEG washing machine error codes and warnings