AEG washing machine error codes and warnings

AEG washing machine error codes and warnings

AEG warnings are grouped by water inlet, drainage, door locking, protection, heating and power supply. Identify the PNC to apply the table to your platform.

Written code or sequence of flashes

In European AEG support families, E10/E11/C1 may be accompanied by one beep or flash; E20/E21/C2, by two; E40/E41, by four. Count complete sequences and pauses, and check that your manual documents this way of reading them. Don't interpret every flash as a code.

The condition changes what to prioritise

EF0/EFO and EF3 require you to distinguish between foam, laundry distribution and a leak. If water is escaping, deal with the leak before attempting any reset. EH0/EHO relates to the power supply; E60 covers heating problems, but does not identify a specific component on its own.

E50, C9 and F9: get help if they persist

The official AEG help for E50 groups these messages as a motor or motor-control fault. It suggests a reset and recommends contacting service if the warning returns. Don't keep using the appliance if the problem persists, and don't test internal circuits to find the cause.

The PNC and load type help you check the manual, filter access and controls. This information doesn't authorise applying the meaning of an AEG code to another brand in the same group, or extending it to every market.

Frequently Asked Questions

Where can I find the full model number of my AEG washing machine?

Look for the model and PNC on the rating plate, using the location shown in the manual. Copy the full reference and version, if shown; the marketing name doesn't identify every variant.

Does the same code mean the same thing on all AEG washing machines?

You shouldn't assume so. The PNC distinguishes platforms and variants, and procedures for front loaders, top loaders and washer-dryers may differ even when they belong to the same warning family.

How can I tell a normal warning from a fault?

Compare the sequence with the manual and the cycle behaviour. An active function or a waiting period may be normal; a persistent warning about the power supply, door lock or protection requires its specific troubleshooting steps.

Does clearing the code confirm that the problem is fixed?

No. A reset may clear the display without fixing the cause. If there is a leak or a persistent electrical fault, stop using the appliance and seek help.

What information should I give the service technician?

Provide the model, PNC, complete code or flash sequence, and load type. Mention the cycle stage, any water left in the machine or visible leak, and any changes to the installation or detergent dosing.

Keep the full subcode; summarising all warnings as an electrical fault removes useful diagnostic information.