
To interpret a Maytag alert, distinguish between front-load, HE top-load and panel functions. The references in this index are based on North American support information.
Two types of control panels
Codes on a front-load washer may include separate groups, such as F8 E1. HE top-load washers may also display words or abbreviations such as drn, lid and Ofb. Copy all the characters before choosing a guide: do not interpret a lid message as a door message.
In the official front-load washer table, LOC/LC identifies locked controls; dET depends on whether the dispenser uses a cartridge. These are different situations from a general start-up failure.
Water, suds and loads
If the appliance is taking too long to fill, see F8 E1, LF and Lo FL. If the problem occurs while draining, F9 E1 and drn provide separate checks for each platform. Do not assume the pump needs replacing just because water remains.
Suds have their own troubleshooting steps under Sud and Sd. For laundry, distinguish Ofb, an unbalanced load from OL, an overloaded washer. In both cases, the selected programme matters, as does how much the drum can physically hold.
Brief alerts and limited checks
Int may appear during a pause or cancellation; rL/F34 means removing items from the cleaning cycle on compatible front-load washers. On top-load washers, PF indicates a power cut, while lid calls for checking the lid and cycle status. Follow the manual to continue: there is no single reset that works for all these situations.
If there is a leak, an electrical smell or a door lock that is not working, stop using the appliance. When requesting service, note the details on the identification plate and when the alert appeared.
Frequently Asked Questions
Where can I find the full model number of my Maytag washing machine?
The full number is on the identification plate and is usually included in the appliance documentation. Check the manual to find the plate on your model; the range name is not a substitute for that reference.
Does the same code mean the same thing on all its washing machines?
Not necessarily. Maytag front-load and HE top-load washers have different tables and controls; also confirm the market for which the appliance was made.
How can I tell a normal alert from a fault?
Check whether the message describes a selected function, such as Control Lock, or a condition that has prevented the cycle from finishing. A drain delay after cancelling does not have the same troubleshooting steps as a drain that repeatedly fails.
Does clearing the code confirm that the problem is fixed?
No. If the machine displays it again under the same conditions, the cause still needs attention. A code disappearing after disconnecting the power does not mean it is safe to continue using the appliance if there is a leak or a faulty lock.
What information should I give the service technician?
Provide the model and serial numbers, the complete code, and whether the washer is front-load or top-load. Include when it stops, what is left inside, and whether you changed the load, product or connections just before the problem.
For a code not listed here, consult the exact model's manual rather than automatically applying another brand's interpretation.




