E60 and the E61, E62 and E69 sub-codes listed by AEG relate to heating problems. If the warning returns after the permitted reset, the appliance needs diagnosis.
Do not confuse the selected temperature with the displayed error
The manufacturer's documentation groups these codes together without making them an instruction to replace the heating element. A programme that limits the temperature or adjusts its duration does not indicate a fault unless a corresponding message appears.
Note the complete code, programme and stage. For a washer-dryer, state whether it occurred during washing or drying; the active function helps describe the issue. Do not check the heating by touching internal parts or bypassing sensors.
A reset before requesting assistance
AEG's support guidance recommends disconnecting the appliance from the power supply for about one minute and reconnecting it. Confirm the procedure for your PNC and carry it out only from a dry, safe access point, with no visible electrical damage.
If the code returns, stop retrying and request service. Switching to a cold programme to keep using the appliance does not confirm that the fault has been resolved. The electrical and heating fault guide helps you record related signs without diagnosing a component based on the code.
Report the exact sub-code; summarising E61 or E69 as E60 may lose useful information.
View all articles in AEG washing machine error codes and warnings
