Error E20, E21 or C2 in AEG washing machines: not draining

E20, E21 and C2 on AEG machines belong to the drainage fault family; the documented models may also emit two beeps or flashes.

Start with the installation and drain outlet

The manufacturer’s documentation lists E22, E23 and E24 among the related alerts. Keep the subcode in mind: grouping these codes to check drainage does not mean that any particular part has failed.

Check the route of the hose, how far it extends into the outlet, and its height against the diagram in the manual. If it is connected under a sink, check for a blockage or backflow in the household drain. Check for excess suds if water is being retained.

Accessible filter with controlled draining

If your PNC model has a user-accessible filter, stop and safely disconnect the appliance, allow the water to cool, and keep a container ready. Drain the water using the specified method before fully removing the cap. Clean only accessible debris and refit the cap so that it seals properly.

The guide to cleaning the drain filter provides further preparation guidance. If there is no intended access point or water remains after you check the drain route, request assistance. A humming noise does not prove that the flow is correct or confirm that the pump is faulty.

Do not force the door open to remove clothes while the drum still contains an unsafe level of water.

View all articles in AEG washing machine error codes and warnings